Precautions for the use of multifunctional hospital beds

The multifunctional hospital bed has been widely used in our life at this stage. The application of this product provides great convenience for families with long-term bedridden inconvenience patients. Do you know what precautions should be taken when applying this product? I will introduce it to you next.
1. When the left and right rollover function is required, the bed surface of the multifunctional hospital bed must be in a horizontal position. Similarly, when the back bed surface is raised and lowered, the side bed surface must be lowered to a horizontal position.
2. When using the sitting position to relieve the stool, the wheelchair function or the foot washing, it is necessary to raise the back bed surface. Be sure to raise the thigh bed surface to an appropriate height before this, so as to prevent the patient from sliding down.
3. Don't drive on bumpy roads, and don't park on slopes.
4. Add a small amount of lubricating oil to the screw nut and shaft pin position every year.
5. Please always check the movable shaft pins, screws and guardrail alignment wires of the multifunctional hospital bed to avoid loosening and falling.
6. It is strictly forbidden to push or pull the gas spring.
7. For transmission parts such as lead screw, please do not apply forcefully. If there is a fault, please apply it after inspection.
8. When the footbed surface is raised and lowered, please gently lift the footbed surface up first, and then lift the control handle to avoid breaking the handle.
9. It is strictly forbidden to sit on both ends of the bed.
10. Please use the seat belt, and it is strictly forbidden for children to use it.